3.7 Set
System
Options
Set System Options
===================
Record Pause: Off
Audio Format: 25 fps
Record Pause:
On / Off
(default off). Selects Record-pause mode where pressing
the record key whilst recoding causes the unit to enter record
pause. Pressing the record key for 2 seconds stops recording. See
Section 2.6 page 7.
Audio format:
MPEG:
(default) standard MPEG-1 layer 2 audio compression at bit
rate of 256 kbps.
LPCM:
Linear pulse code modulation. Uncompressed audio (16 bit,
48kHz sampling) with a bit rate of 1.536 Mbps.
AC-3:
Dolby digital audio compression, bit rate 256 kbps.
NB:
LPCM and AC-3 may have problems with playback on certain
players, especially in “high” and “very high” video quality modes.
Auto Shutdown: Smart:
(default) AfterBurner will stay on unless a timer is active
when it will enter stand-by after 5 minutes of idle operation.
On:
AfterBurner will enter standby after 5 minutes of idle operation.
Off:
AfterBurner will not enter standby.
MD5 Video files: No / Yes
(default “No”). Produces a 32 byte hash code of the video
(.VOB) files which can be subsequently used as data integrity
check. The has code is written with the video files to DVD or can
be viewed via the web interface (Section 5.3, page 29). NB:
Enabling hash coding of the video files doubles the burn time.
DVD Type:
Normal / Dual:
(default normal) selects whether the unit will burn
single (normal) 4.7 GB DVDs or Dual layer (8.4 GB) DVDs.
IMPORTANT
:
if Dual mode selected, it will not be possible to burn
the recordings to standard (single layer) DVDs.
