ON
STBY
REC
Mun+
Mun-
DVD
Figure 2: AfterBurner-2 Buttons.
JKL
M
Navigation buttons
Mnu+ / Mnu-
Steps though main menu items (At any point, pressing for
more than 2 seconds exits all menus).
REC
Starts / stops recording (shows red when recording, flashing
red when recording in time-lapse).
DVD
Powers up DVD drive, opens / closes tray, starts DVD burn.
ON Power-up
unit.
STBY
Power down unit (standby for timer modes).
In general, the “Mun+” or “Mun-“ keys are used to navigate a list of top-level menus. The
J
M
keys are then used to scroll through the list of items within that top-level menu. The
selected parameter within the menu list is shown
flashing
and is adjusted by using the
K L
keys. Once a parameter has been adjusted, it is automatically stored when moving to the
next menu.
Tip
M
At any point when navigating the LCD menus, it is possible to return to the start-up
screen by pressing the either the “Mun+” or “Mun-“ keys for 2 seconds.
The buttons list the files on
the internal disk. Once selected,
press “DVD” to burn. buttons
scroll through the file properties.
LCD scrolls through various key
settings and status.
enter the Advanced menus
Burn:
Eject:
Auto Mode, Manual only, at
given time.
Manual, when burnt
MB No. of copies:
1, 2, 3, 4, 5, 6,
7, 8
DVD:
Quality:
Set time per DVD 24hr
default
Very low, low, medium,
high, very high
Video only, audio + video, audio
Figure 3: AfterBuner-2 Top Level Menus
2.4 Record
Set-up
As standard, AfterBurner-2 is shipped configured for 24 hour time-lapse recording (at 2
pictures per second) in medium quality. This may be altered by pressing the “Mnu+” key
3 times to show the following screen:
Set Record Mode
===================
