B-526-10N-E
12
(1) Ordinary operation
"MODE" switch is turned "ON" (selector magnet
held close to it.)
⇒
8 bars appear.
Indicates that the switch is turned
"ON."
⇒
Immediately turning "OFF" (selector magnet the
window to the next one.
(2) Prolonged operation
H e l d t u r n e d O N w i t h o u t t u r n i n g " O F F "
immediately by removing the fingers.
⇒
Bars begin to disappear from the leftmost one.
Indicates a countdown before
"prolonged depression" processing
takes place.
⇒
Holding turned ON until the last bar disappears
results in "prolonged depression" processing (
※
)
to takes place.
(Turning OFF before the last bar disappears
results in the same behavior as in
①
to take
place.
※
Prolonged operation: An operation required for
Normal mode
⇔
Parameter review mode
selection, finalizing the parameter setting, etc.
NOTE: While RESET switch is in a valid mode (resettable total mode, etc.), the same message as stated
above appears in response to RESET switch operation.
(There is no distinction between ordinary depression and prolonged depression.)
5.1.3 About "RESET" Switch
Only in the resettable mode, or in "Mode Symbol:
“
“
, the
accumulated total reading is resettable.
CAUTION
Do not fail to install the selector magnet in its
holder after use lest you will not lose it. It uses
an intensive magnet; never hold it close to
floppy disks or other magnetic storage items.
“RESET”
Selector magnet holder
5.1.2 About the Displayed Messages during Operation
Summary of Contents for ULTRA UF-II
Page 67: ...B 526 10N E 67...
