![background image](http://html1.mh-extra.com/html/oval/tf1015-p11g-11-a-series/tf1015-p11g-11-a-series_instructions-manual_1662175027.webp)
S-93--E
8.8 Error Messages
When an error arises, the display shows alternately the flowrate and an error message.
Such a message may appear at the time power is turned on.
Kind of error
Abnormal state
Coping process
Pulse output
error
Fails to produce
pulses properly.
Make sure of the following three:
• Pulse weight (parameter)
• Pulse "ON" duration (parameter)
• Instant flowrate while an error message ap-
pears.
Select parameters such that the parameters
and variable above meet the following condi-
tion:
Flowrate with error message [L (normal)]
/pulse weight [L/min (normal)]
×
(pulse "ON" duration [msec] + )
/0 < 000
Analog error
More than %
of analog full scale
value is flowing
due to excessive
flowrate or the like.
Take the following countermeasures.
• Lower the flowrate.
• Increase the set value of analog full-scale
value (parameter).
Setting error
Fails to calculate
the flow.
Transmitter is suspected to be at fault.
Consult factory for technical assistance.
Accumulated
total error
Accumulated
total data is
unusual.
Transmitter is suspected to be at fault.
Consult factory.
For a short term remedy, pressing the "RE-
SET" button resets the accumulated total to 0,
but you can make flowmetering as usual.
Sensor error
Fails to measure
flowrate properly.
Sensor or transmitter is suspected to be at
fault.
Consult factory for technical assistance.
Description
out. Err.
PA. Err.1
PA. Err.2
Ain1 Err.
AnA. Err.
Ain2 Err.
Description
Description
Description
Description
Summary of Contents for TF1015-P11G-11 A Series
Page 31: ...S 193 11 E 31...