![background image](http://html1.mh-extra.com/html/oval/tf1015-p11g-11-a-series/tf1015-p11g-11-a-series_instructions-manual_1662175026.webp)
S-93--E
8.7.2 Analog Trim (20mA)
(1) Select Analog Trim (20mA).
Description
Flowrate window
Hold the "MODE" button depressed for sec. to show the alarm menu.
Press the "RESET" button once to show the basic data menu.
Press the "MODE" button 9 times to show the analog trim (0mA).
(2) Run Analog Trim (20mA).
Description
Analog trim (0mA) window
Press the "MODE" button for sec. to show the analog trim (0mA) window
[The rightmost figure (0) begins to blink on and off..]
If analog output is deviated from 0mA, take the steps that follow. If not, take
steps necessary to terminate the analog trim (0mA) process.
Set a numerical value the analog output ammeter reads. For example, if the
ammeter reads "9.90," set a value "9.90".
• The figure place of interest (blinking digit) moves to the left each time the
"MODE" switch is turned on.
• The blinking figure increases by one each time the "RESET" switch is turned on.
Holding the "MODE" button depressed for seconds, the numerical value
becomes a blinking "0.00" and the transmitter produces an analog output
adjusted based on the established numerical value. If a deviation of analog
output is still large, repeat the procedure to set the numerical value.
(3) Terminate Analog Trim (20mA).
Description
Analog output adjusted to 0mA is shown.
(The rightmost figure (0) blinks on and off..)
Depress the "MODE" button for seconds to show the analog trim (0mA)
window. (The rightmost figure (0) stops blinking.)
Press the "MODE" button times to show the basic data menu.
Depress the "MODE" button for seconds and the flowrate window appears.
Press MODE for sec.
Press RESET
once.
Press MODE times.
Alarm menu
Basic data menu
Flowrate
Analog trim (0mA)
Analog trim (0mA)
.......................
Press MODE for sec.
Press MODE for sec.
.......................
.......................
.......................
.......................
.......................
.......................
Press MODE for sec.
Press RESET
3 times.
Press MODE for sec.
Analog trim (0mA)
Basic data menu
Flowrate
.......................
.......................
.......................
.......................
Summary of Contents for TF1015-P11G-11 A Series
Page 31: ...S 193 11 E 31...