S-178-10(E)
1
Relative to the figure at right of
decimal point, this point moves.
A figure representing the decimal places of interest (flickers)
Pressing RESET button ON, the figure increases by
one .
If a setting above (bP = ) is chosen, the instantaneous flowrate reads [b1 □□□□ . □□ ].
③
Decimal point setup parameters (bP and SP)
In the parameter setup mode, a figure representing the decimal places of interest flickers.
MODE
…
Not used in the setup process
RESET
…
Each time the switch is turned ON, the decimal point moves one place to the left and the figure
increases by one.
→
When the decimal point appears at the desired location, hold the "MODE" switch depressed for 2 seconds
(the new setting is established and the screen returns to the review mode).
Example: Parameter
“
bP
”
(decimal place in instantaneous flowrate)
(“0”→“1”→“” )