S-178-10(E）
R
M
MODE Switch
RESET Switch
(3) Parameter Setup Procedure
With MODE and RESET switches in the display, you can set up parameters.
A diagram to show parameter setup flow
Measure Mode
(normal mode)
Review Mode
Parameter
Setup Mode
7
1
●
Given below is the parameter setup procedure:
①In "Measure Mode (normal mode)," hold MODE switch depressed
for seconds to go into "Review Mode."
⑦Hold MODE switch depressed for seconds to go back
to "Measure Mode."
⑥Using MODE and RESET switches,
show the title (= bdAtA, PuLSE, or Co.).
⑤Following the parameter entry, hold MODE switch depressed
for seconds to go back to "Review Mode."
④Using MODE and RESET switches, set up the new parameter.
(For details of this operation, see () on page .)
③Hold MODE switch depressed for seconds to go
into "Parameter Setup Mode."
②Using MODE and RESET switches, show the parameter
you want to modify.
NOTES:
1. For details of switch opera-
tion in steps
①
,
②
,
③
,
⑥
,
and
⑦
, see
“
Menu Trees
and Switch Operation
”
on
page 57.
2. Throughout the text in this
instruction manual, holding
the MODE and RESET
switches depressed is
expressed as
“
turned ON
”
.
