S-178-10(E)
7
(4) Menu Trees and Switch Operation
None
Accumulated total
Measure
Mode
(normal mode)
b1
Instant. flowrate (hourly)
b Instant. flowrate (per-minute)
C
bdAtA
Basic data
Resettable total
Review
Mode
F
Meter factor
H
Conversion factor
Pu
Pulse weight
PuLSE
Pulse data
Pon
Pulse width
Pd1
Dummy output 1
Pd2
Dummy output 2
Review mode (property 1)
Property 1
Property 2
Param. setup mode
Un
Units of registration
bP
Instant. flowrate decimal
point location
SP
Total flow decimal point location
At
Sampling upper limit
A
Sampling number
All places
All places illuminated
MODE“ON”for sec.
MODE“ON”for sec.
MODE“ON”for sec.
MODE“ON”for sec.
Review mode (property 2)
Special function run mode
Procedure to move to the parameter setup mode or special function run mode
Description of arrows
: Moves to the target upon depression of “MODE” switch.
: Moves to the target by holding “MODE” switch depressed for sec.
: Moves to the target upon depression of “RESET” switch.
Dummy outputs available
In the special function run mode,
RESET→Starts a simulated factored pulse outpuut.
MODE → Stops a simulated factored pulse outpuut.
*at Pd1, 1Hz output
at Pd, 10Hz output
*
No dummy output is available for unfctored
pulses.
Description of properties of menu items in the review mode
: Parameters overwritable
: Special functions
NOTE: Of the special functions, “Communication set”
is used only in the factory; it is not user-serviceable setting.
NOTE: Goes back to the screen before
a switch to the review mode
*