None Accumulated total flow
b1 Instant. flowrate (hourly)
b2 Inst.flowrate (per-min.)
C
Resettable total flow
NOTE:
Retains variables before a switch
to the review mode.
NOTE:
Goes back to the screen before
a switch to the review mode.
Measure mode (normal mode)
Review setup mode
bdAtA Basic data
F
Meter factor
Pu
Conversion factor
Pu
Pulse weight
Un
Indicated unit
bP
Inst. flowrate decimal pt.
SP
Total flow decimal pt.
At
Sampling upper limit
A
Sampling number
All light All places illuminate
: Pressing “MODE”switch results in a transition to take place.
: Holding “MODE”switch depressed continuously for 5 sec.
results in a transition to take place.
: Indicates the title (not any parameter).
: Holding “MODE”switch depressed for 2 sec. at this window changes the review
mode to the parameter setup mode.
In the write mode, the following operations are enabled:
①Pressing “MODE” switch takes the figure up one place.
②Pressing “RESET” switch increases the figure.
③Holding “RESET” switch depressed for 3 sec. resets the
reading.
④Holding “MODE” switch depressed for 2 sec. brings up
the review mode.
: Only for adjustment at the factory. Normally unused.
(At this display, do not use prolonged depression of “MODE”
switch.)
29
D-546-9-E
Table 10.2 Menu Trees and Switch Operation
