E-822-9-E
0
LED lights for the
preset number at
intervals of 0.5 sec.
LED lights
for 0.5 sec.
Meter error
set?
LED blinks twice
for a second.
Positive
correction?
LED lights twice.
LED lights
for 0.5 sec.
LED lights for the
preset number at
intervals of 0.5 sec.
LED lights
for 0.5 sec.
LED lights for the
preset number at
intervals of 0.5 sec.
LED lights
for 0.5 sec.
Meter Size is shown in inches:
Indicates the rotary switch position currently set up.
Postitions A,B,C,D,E, and F are indicated by blinking
10,11,12,13,14, and 15 times, respectively.
NO
NO
YES
YES
Meter error
set or not
Shows whether positive
correction or negative
correction.
LED lights once.
Shows the first digit of
the figure in percent (0 to 3).
Shows the last digit of
the figure in percent (0 to 5).
Freq. division
set?
LED lights for 2 sec.
RUN MODE
1/10 Freq. division
set or not
NO (1/100)
YES (1/10)
①Incoming pulses are unaccept-
able while making a check.
②Blink pattern is shown below.
EXAMPLE: Intervals at one second
NOTE:
1 sec. 1 sec. 1 sec.
LIGHTS
LIGHTS
GOES
OUT