E-880CM-1-E
8
6.13 Error Status Read Command (RE)
6.13.1 Description
With this command, you can read the error count of the basic EL4001 and error
fl
ags (statuses). One
error is represented by one byte; 0 (30H) = normal status as opposed to 1 (31H) = error status. (See the
List of Functions.)
In reading individually, a response data is always sent in 2-bytes (speci
fi
ed location and 1-byte data that
follows).
Function codes
00: Error count and listing
01
…
: Individual error status
A List of Error Status Read Commands Functions Generated by the Basic EL4501
Func.
byte
Func.
code
Display
Description
1
01
ADJUST DATA ERROR
Adjust data error : Sumcheck mismatch
2
02
ADJUST DATA LIMIT ERR
Adjust data out of range : Adjustment data is out of acceptable range.
3
03
ADJUST DATA NONE
Adjustment not yet set : Adjustment has not been made.
4
04
MODEL PROGRAM ERROR
Model setup program error : Sumcheck mismatch
5
05
MODEL PROGRAM NONE
Model setup program not yet set : Model setup program has not been set.
6
06
SET PARAMETER ERROR
Setup parameter error : Sumcheck mismatch
7
07
SET PARAMETER NONE
Setup parameter not yet set : Setup parameters are set to defaults.
8
08
RAM CHECK ERROR
RAM check error : RAM check ended in error.
9
09
EEPROM CHECK ERROR
EEPROM check error : EEPROM check ended in error.
10
0A
PARAMETER PROTECT ERR
Parameter write protect error : Parameter write protect in error
11
0B
PROGRAM PROTECT ERR
Model setup program write protect error
12
0C
CALENDER ERROR
Calendar setup error : Calendar setup is in error.
13
0D
IC CARD WRITE ERROR
IC card write error : Fails to write the IC card.
14
0E
IC CARD READ ERROR
IC card read error : Fails to read the IC card.
15
0F
IC CARD ACCESS ERROR
IC card access error : Card removed while accessing the IC card.
16
10
POWER ON
Power ON : Power is turned ON.
17
11
A/D CONVERT ERROR
A/D conversion error : Density converter circuit has a fault.
18
12
DENSITY CONVERT ERROR
Density conversion error : Density converter circuit has a fault.
19
13
UNDEFINED
20
14
TEMP1. (PT) OVER
Temp. input 1 Pt over flow : Temp. input 1 Pt level exceeded over alarm point.
21
15
TEMP1. (PT) UNDER
Temp. input 1 Pt under flow : Temp. input 1 Pt level exceeded under alarm point.
22
16
TEMP2. (PT) OVER
Temp. input 2 Pt over flow : Temp. input 2 Pt level exceeded over alarm point.
23
17
TEMP2. (PT) UNDER
Temp. input 2 Pt under flow : Temp. input 2 Pt level exceeded under alarm point.
24
18
TEMP1. (ANA) OVER
Temp. input 1 ANA over flow : Temp, input 1 ANA level exceeded over alarm point.
25
19
TEMP1. (ANA) UNDER
Temp. input 1 ANA under flow : Temp. input 1 ANA level exceeded under alarm point.
26
1A
TEMP2. (ANA) OVER
Temp. input 2 ANA over flow : Temp. input 2 ANA level exceeded over alarm point.
27
1B
TEMP2. (ANA) UNDER
Temp, input 2 ANA under flow : Temp. input 2 ANA level exceeded under alarm point.
28
1C
PRESS1. OVER
Press. input 1 over flow : Press. input 1 level exceeded over alarm point.
29
1D
PRESS1. UNDER
Press, input 1 under flow : Press. input 1 level fell below under alarm point.
30
1E
PRESS2. OVER
Press. input 2 over flow : Press. input 2 level exceeded over alarm point.
31
1F
PRESS2. UNDER
Press. input 2 under flow : Press. input 2 level fell below under alarm point.
32
20
DENSITY OVER
Density input 1 over flow : Density input 1 level exceeded over alarm point.
33
21
DENSITY UNDER
Density input 1 under flow : Density input 1 level fell below under alarm point.
34
22
4mA SCALER 1 UNDER
Analog output 1 under flow : Analog output 1 level fell below under alarm point.
35
23
20mA SCALER 1 OVER
Analog output 1 over flow : Analog output 1 level exceeded over alarm point.
36
24
4mA SCALER 2 UNDER
Analog output 2 under flow : Analog output 2 level fell below under alarm point.
37
25
20mA SCALER 2 OVER
Analog output 2 over flow : Analog output 2 level exceeded over alarm point.
38
26
UNDEFINED
39
27
CALCULATION
Calculation start / end : Keeps start and end time of calculation for error logging.
40
28
UNDEFINED
41
29
UNDEFINED
42
2A
UNDEFINED
43
2B
UNDEFINED
44
2C
UNDEFINED
45
2D
UNDEFINED
46
2E
UNDEFINED
47
2F
UNDEFINED
48
30
UNDEFINED