![background image](http://html1.mh-extra.com/html/oval/el4001-series/el4001-series_communications-manual_1662140015.webp)
E-880CM-1-E
1
Code
Name
Description
00
Normal data reception
Normal reception
01
Communication error
Unde
fi
ned
02
Parity error
Parity check error (hardware)
03
Data length error
Data received has an illegal length (buffer over
fl
ow)
04
Data error
Data received is invalid.
05
BCC check error
BCC (block check character) check error (software)
10
Command error
An unde
fi
ned command has been received.
11
Function code error
Data received is an error.
12
Local select
An unde
fi
ned function code has been received.
13
Forced remote termination
A switchover from remote to local has taken place by operating a key.
(A switchover was made properly in the RUN mode.)
20
Local error
A switchover from remote to local has taken place by operating a key.
(A forced switchover was made in a mode other than RUN mode.)
21
Mode lock error
Mode select remains locked by DIP switch.
22
Mode setup error
Command received is invalid to implement in the current mode.
23
Password error
Invalid password
24
Parameter error
Parameter (data format) is invalid.
25
Setting out of range
Setting is invalid.
30
Model-speci
fi
c command
Commands incompatible with this model
6.6 Response Codes