2
3
FLOCK SUPERIOR INSTRUCTION MANUAL
INFLATING AIR MATTRESS USING AC 240V PUMP
1. Open cord storage compartment and connect the plug to AC 240V power
2. Turn the arrow to inflate position (2) to start pumping
3. When the air mattress is fully inflated turn the arrow to off position (3) and
unplug from power outlet
4. Place the cord back into storage compartment
DEFLATING AIR MATTRESS USING AC 240V PUMP
• Open cord storage compartment and connect the plug to AC 240V power
• Turn the arrow to deflate position to start pumping
• After the air mattress is deflated turn the arrow to off position and unplug from
power outlet
• Place the cord back into storage compartment
READ FOLLOWING INSTRUCTIONS AND WARNINGS BEFORE USE
• Pump: 220-240V ~ 50-60Hz, 0.66A, 120W.
• This build in pump is only to be used with the power cord provided
with the air mattress
• Never leave the air pump unattended while in use
• Stop the pump immediately when the air mattress is fully air-filled
• The pump can be used for a maximum of 5 minutes continuous use only
• Leave the pump to cool for 30 minutes before using it again
• Never overfill or over inflate the air mattress
• Always keep inflation/deflation ports unobstructed
• Do not use the build in pump under wet conditions. Do not leave the air
mattress out in wet conditions. To reduce the risk of electric shock, do
not expose the air pump to rain and store it indoors. Do not drop unit
into water or other liquids
• The supply cord cannot be replaced. If the cord is damaged the power supply
should be scrapped
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning the use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision. To avoid
fading, corrosion and failure do not use paint thinner, benzene, alcohol and
other volatile substances to clean the appliance.
• Do not dispose of electrical appliances as unsorted municipal waste,
use separate collection facilities
• Contact your local government for information regarding the
collection systems available
• If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain,
damaging your health and well-being
MATERIALS
PVC
CARE INSTRUCTIONS
• Clean the material with a soft cloth and mix of soft detergent and warm water
Do not use bleach or any abrasive cleaners
• Allow to thoroughly dry and clean before storage
• Do not dry in direct sunlight
IMPORTANT
DESIGNED FOR ACV POWER SUPPLY ONLY
UK