5
4
IF YOU WISH TO FINALLY DISPOSE OF THE DEVICE
1. Remove cables, lid, tie-down brackets from body with compressor and dispose according to
local regulations. Ask your local recycling centre for details about how to do this in accordance
with the applicable disposal regulations.
2. Place the packaging material in the appropriate recycling waste bins wherever possible.
2. PRODUCT FEATURES
• High-efficiency DC compressor and conversion module.
• CFC free and great heat insulation.
• DC 12/24V or AC 100~240V (using dedicated adapter) power supply.
• Fast cooling to -20°C/-4°F(based on 25°C/77°F room temperature).
• Intelligent battery protection system.
• Digital display for temperature setting.
• Cup holder design and adjustable lid opening direction.
3. PRODUCT STRUCTURE
4. REVERSE LID OPENING DIRECTION
The lid has two opening directions and can be taken off at an angle of 20°. When installing it back, align the
lid shaft with the compartment hole and then insert it.
5. FUNCTIONS AND OPERATION
•
Power Supply:
connect to DC 12V/24V or AC 100-240V power (using dedicated adapter).
•
Display Screen Initialization:
connect to the power supply, the buzzer will make a long beep and the
display will be on for 2 seconds then enter the normal operating mode.
•
Power On/Off:
press to switch ON/OFF.
•
Temperature Setting:
press or for temperature setting, the setting will be saved automatically after
having stopping operating for three seconds (Note: the temperature displayed is the current temperature
of the compartment, it wiII take a while to reach the set temperature.)
Temperature setting range: -20~20°C (-4~68°F).
•
Cooling Mode:
under the running state, press to switch to MAX (fast cooling) and ECO (Energy saving
Mode). (*Factory setting is MAX).
•
Battery Protection Mode:
under the running state, long press for three seconds until screen flashes,
then press again to select protection mode H (High), M (Medium) and L (Low). (*Factory setting is H).
VOLTAGE REFERENCE:
* the voltage is a theoretical value, there may be a deviation in different scenarios.
* H should be set when the product is connected to car power, and M or L should be set when it is
connected to a portable battery or other back-up battery.
•
Temperature Unit Setting:
switch off the cool box, long press for three seconds until E1 displays, then
switch to E5 by pressing again. Under E5 mode, press or to select Celsius or Fahrenheit. (*Factory
setting is °C.)
•
Reset:
switch off the cool box, long press for three seconds until E1 displays, under E1 mode, long
press
at the same time for three seconds to reset it.
UK: INSTRUCTION MANUAL
UK: INSTRUCTION MANUAL
Sealing strip
Lid latch
Control panel
Handle
Machine compartment
Charging port
Shaft
Hole
Set
(-20) Current Temperature
(°C °F) Temperature Unit
(H.M.L) Battery Protection Mode
(13.5v) Current Voltage
MAX (Fast cooling)
ECO (Energy-saving)
Current Battery (for reference)
Power
Temperature
Control
USB: 5V/1A
INPUT
MODE
DC 12V
DC 24V
CUT-OFF
CUT-IN
CUT-OFF
CUT-IN
L
8.5V
10.9V
21.3V
22.7V
M
10.1V
11.4V
22.3V
23.7V
H
11.1V
12.4V
24.3V
25.7V
