1.5 Connecting Inputs
. Input connections are made via the 3-pin XLR-female type or 1/4" phone Jack connectors on the
rear side of the amplifier. The polarity is shown in figure 1.5.1.
The figure below shows the connection of analog input for balanced and unbalanced line. You can use both configuration,
but you must consider that unbalanced long line can introduce noise in the audio system. The Link switch located in the
rear panel is for direct paralleling the rear input connectors. You can use the remaining input connector to carry signal to
other amps.
IN(-)
IN(+)
GND
Balanced input
IN(+)
SHIELD
Unbalanced input
/
figure 1.5.2
figure 1.5.1
OUT2
IN2
IN1
OUT1
TURN TO
LO
C
K
TURN TO
LO
C
K
“W
ARNING
To
reduce
The
Risk
of
Fire
or
Electric
Shock,
do
not
Expose
this
Apparatus
to
Rain
or
Moisture”
LINK ON OFF
CLASS2
WIRING
pin2 - IN(+)
pin3 - IN(-)
pin1 - GND
IN(+)
IN(-)
GND
For T Five, the input connections are showed in the figure below; analog input for balanced and unbalanced line is also
available for this models.
pin2 - IN(+)
pin3 - IN(-)
pin1 - GND
pin 2 - IN(+)
pin1 - GND
pin 3 - IN(-)
signal source input
XLR female connector
signal source output
XLR male connector
XLR female
XLR male
T Five model
Professional amplifiers
T Series
Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: [email protected]
7
