E
Important safety instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION:
SAFEGUARDS: Electrical energy can perform many useful functions. This unit has been engineered and
manufactured to assure your personal safety. Improper use can result in potential electrical shock or fire
hazards. In order not to defeat the safeguards, observe the following instructions for its installation, use and
servicing.
To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside. Refer
servicing to qualified service personnel.
KEEP THIS INSTRUCTIONS
The Outline T Series is installed according to the Canadian Electrical Code or National Electrical Code, as applicable.
T Eleven - T Nine - T Seven
This equipment has been tested and found to compliant by Competent Body (Directive 89/336/EEC-EMC) pursuant to
the product family standard for audio professional use:
EN 55103-1 and EN 55103-2 standard ); EN61000- 3 - 2 , EN 61000 - 3 - 3.
Conducted Emissions
: Electromagnetic Ambient E1, E2, E3 / Class B
Radiated Emissions
: Electromagnetic Ambient E1, E2, E3 / Class B
In a domestic environment this product may cause radio interferences in which case the user may be required to take
adequate measures.
This equipment has been tested and found to comply by Notified Body (Directive 2006/95/EEC L.V) pursuant to the
audio apparatus safety requirements: Standard EN 60065.
(*) T Five pending
T Five(*)
This equipment has been tested and found to compliant by Competent Body (Directive 89/336/EEC-EMC) pursuant to
the product family standard for audio professional use:
EN 55103-1 and EN 55103-2 standard ); EN61000- 3 - 2 , EN 61000 - 3 - 3.
Conducted Emissions
: Electromagnetic Ambient E1, E2, E3 / Class B
Radiated Emissions
: Electromagnetic Ambient E4, E5 / Class A
Radiated Emissions
: Electromagnetic Ambient E1, E2, E3 / Class B (**)
In a domestic environment this product may cause radio interferences in which case the user may be required to take
adequate measures.
(**) Additional round snap ferrite (of at least 145 Ohm @ 25 Mhz and 265 Ohm @ 100MHz) on Output cables and
Mains Cord allows to fulfill Electromagnetic Ambient E1, E2, E3 / Class B on radiate Emissions.
This equipment has been tested and found to comply by Notified Body (Directive 2006/95/EEC L.V) pursuant to the
audio apparatus safety requirements: Standard EN 60065.
Approvals
Warning notices
LOCATION:
I
nstall the amplifier in a well-ventilated location where it will not be exposed to high temperature or
humidity.
Do not install the amplifier in a location that is exposed to direct rays of the sun, or near to hot appliances or radiators.
Excessive heat can adversely affect the cabinet and internal components. Installation of the amplifier in a damp or
dusty environment may result in malfunction or accident.
Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: [email protected]
2
The Sound of Big Ideas
