back
-
+
sel
000000
Set keylock Code
^
2.3.21 Set keylock code
In this screen you can insert the numeric key to unlock the settings; the same screen appears when the "unlock" button in
the main screen is pressed. There is a universal key to unlock the settings: this is
.
270156
figure 2.3.20
2.3.22 Menu locking
In addition to the basic pushbutton locking function, a new menu locking strategy was introduced. There are three levels of
locking: All locked, Allow safe, Allow all.
: only the menus for displaying infos are enabled, the other are hidden. Presets cannot be loaded.
: user can change from Analog input to AES3 input, always with DSP into the signal path. Some common DSP
parameters can be changed (AES3 gain trim, main delay, DSP input selection)*. Only local presets can be recalled, and
they should be all safe for the speaker system connected to that amplifier (example: HF driver 3 dB, HF driver 0 dB, HF
3 dB).
: all settings menus are enabled. User can recall presets from either local memory or smartcard.
Furthermore, local presets can be made Read-Only by enabling the “Lock presets” function, in order to preserve the original
settings stored on the amplifier.
The lock code, when set different from 000000, protects the whole Menu locking submenu.
All locked
Allow safe
Allow all
* Available only with optional DSP board
2.3.20 LCD contrast
In this screen you can set the contrast of the LCD display by pushing the +/- buttons (see figure 2.3.19).
back
-
+
Contrast
6
figure 2.3.19
2.3.23 Service
The key to activate this function is factory reserved.
Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: [email protected]
18
The Sound of Big Ideas
