The fourth line of the screen shows the functions of the buttons below.
The "lock" function is activated if the corresponding button is pressed more than 1 second; in this case all the other buttons
are locked. The same operation unlocks these buttons (unlock code is required - see par. 2.3.17 for more details).
The "mute" buttons switch off the two channels independently; in this case the parameters of the correspondent channel
disappear and the writing "muted" appears on the third line. The same operation disables the mute function.
If the "menu" button is pressed, the main menu is displayed on the LCD screen.
2.3 The main menu
The figure 2.3.1 shows the main menu. You can scroll the menu items by pushing the up or down buttons and choose the
selected one by pushing "ok" (if the chosen item enables or disables a function, the writing "on" is replaced with "off" for
disabling it, or "on" for enabling it. The menu tree is shown in figure 2.3.2.
menu
Settings
Display
Local Preset
figure 2.3.1
figure 2.3.2
back
menu
Settings
Output attenuation
Input gain/sens
Input select
Max output voltage
Max mains current
Clip limiter CH1
Clip limiter CH2
Gate CH1
Gate CH2
Mute at Power on
Display
Bar meters
Output meters
Temperature
Mains meters
Setup
Hardware info
Hardware monitor
LCD contrast
Amplifier Settings
Idle Mode
DSP Settings (or not present) *
Network Settings (or not present) **
Amplifier Name
Setup
Hardware info
Hardware monitor
LCD contrast
Local presets
Recall local preset
Save local preset
Set Keylock code
Menu locking
Service
Analog=>DSP=>Out *
AES3=>Out *
AES3=>DSP=>Out *
Network=>Out **
Network=>DSP=>Out * **
Analog=>Out
* Available only with optional DSP board
** Available only with optional Ethernet board
Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: [email protected]
12
The Sound of Big Ideas
