Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 13
35.
Attach end of a 45 1/2” long Soffit Board flush to ends of outside
rafter with 2 - 1 1/4” screws per rafter end. Drill pilot hole in Soffit ends
to prevent splitting. Attach Ridge Board to rafter end aligning to bottom
of rafter with 2 - 1 1/4” screws. Center Soffit on Middle Rafter and
secure with 2- 1 1/4” screws. Measure 45 1/2”from outside rafter and
secure Ridge Board to rafter with 2 - 1 1/4” screws.
Ridge Board
36.
Prior to securing Mid Rafters, measure 20 7/8” from inside of
outer rafter and secure rafter to both Soffit and Ridge Board as per
Step 35
. Complete both Mid Rafters.
Important -
Ridge
Board must be
aligned to bottom
of rafter end.
C. Rafter Section
34.
Starting with
LONG ROOF SIDE
, locate 2
Ridge Boards
(3/4” x 3 1/4”
x 33 1/2”l and 3/4” x 3 1/4” x 57 1/2” long). Attach together with 3/4” x
3 1/4” x 10”
Ridge Board Connector
using 4 - 1 1/4” screws. Locate
5 - 1 1/2” x 2 1/2” x 77 3/4”l
Rafters
and 2 - 1/2” x
4”
x 45 1/2”l
Soffits
and
lay out on a flat level surface.
Note
, Soffits for Long Roof Side are
4” wide
and only 3” on Short Roof Side to be completed later on in
Step 37.
Ridge Board
Ridge Board
Ridge Board Con.
4” wide
Soffits
77 3/4”l Rafters
20 7/8”
20 7/8”
20 7/8”
20 7/8”
91”
Centered on
Rafter
45 1/2”
Middle
Rafter
Mid Rafter
See
Step 32
for
correct orientation
Sof
fit
Long Roof Side
