58.
Attach
Filler Trims
(4 - 1/2” x 2 1/2” x 75”) to
front and rear walls in each
corner. Hammer with
8 - 1 1/4” finishing nails.
Strips are positioned flush
with siding and bottom
skirting.
bottom
skirting
57.
Attach
Bottom Skirting
around the base of the shed.
Skirting will hide floor framing.
Gaps on outside will be
covered by Wide Trim pieces
later. Start with side skirting and
attach with 4 - 1 1/4” finishing
nails per piece. Attach additional
1 1/4” screws on bottom edge of
wall siding into bottom wall plate
to further secure bottom siding to
framing. Drill pilot holes in
siding to prevent splitting.
3 pieces of Bottom Skirting for sides /
2 pieces for front and rear.
side
skirting
Gap in corner
1/4” screw
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 24
59.
Align and attach both
Narrow and Wide
Trims
to in each corner. Starting with a Narrow
Trim (1/2” x 2 1/2” x 79” long), align tight
underneath Soffit and Rafter. Position flush
with Filler Trim so Wide Trim will cap it when
attached in
Step 60
. Use 8 - 1 1/4” finishing
nails to secure. Note that Narrow Trim will sit
slightly below Bottom Skirting when
correctly attached.
Narrow Trim
