Outdoor living today 8x12 Gardener's Shed Assembly Manual Download Page 1 | Manualshive

Page: 1 / 30

background image

8x12 Gardener’s

Shed

Assembly Manual

Thank you for purchasing
an 8x12 Gardener’s Shed
from Outdoor Living
Today. Please take the time
to identify all the parts prior
to assembly.

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential
use, on level ground. Please follow the
instruction manual when building your
Cabana and retain the manual for future
maintenance purposes.

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s).
-if the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

Customer agrees to hold Outdoor Living Today Partnership and any Authorized Dealers free
of any liability for improper installation, maintenance and repair.

Version #9

November 15, 2009

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]

Page 1

In the event of a missing or broken piece, simply call the Outdoor Living Today
Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your
purchase. It is our commitment to you to courier replacement parts, free of charge,
within 10 business days of this notification. Replacement parts will not be
provided free of charge after the 30 day grace period.

1
2
3
...
»

Summary of Contents for 8x12 Gardener's Shed































Reviews:

No comments

Related manuals for 8x12 Gardener's Shed

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 8

Brand: Garantia Pages: 2

Brand: Range Servant Pages: 26

Brand: GARDEN MASTER Pages: 8

Camedia MAUSB-100

Brand: Olympus Pages: 2

Brand: IBM Pages: 258

Precipice Fountain FT-126

Brand: Campania Pages: 2

Brand: REV Ritter Pages: 52

Brand: Forest garden Pages: 4

Brand: Bazoongi Pages: 19

Brand: Schrack Pages: 4

Brand: TW Audio Pages: 12

Brand: Serenity Pages: 6

Brand: Teamson Home Pages: 16

Brand: Quantum Pages: 3

Brand: MD SPORTS Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands