GPS
setting:
Select
TIME ZONE
by pressing S1 or S5 and then press S3 to enter. There are 36 cities to select in this time zone
setting.
Select
DST ON
or
OFF
by pressing S1 or S5 and then press S3 to enter.
Select 12H or 24H format setting by pressing S1 or S5. Press S3 to enter.
Select M-D or D-M (Month/Day or Day/Month) format setting by pressing S1/S5. Press S3 to enter and the watch will
go back to Time.
MANUAL
setting:
Set the
HOUR
by pressing S1 or S5 and then press S3 to enter.
Set the
Minute
by pressing S1 or S5 and then press S3 to enter.
Set the
SECOND
by pressing S1 or S5 and then press S3 to enter.
Set the
YEAR
by pressing S1 or S5 and then press S3 to enter.
Set the
MONTH
by pressing S1 or S5 and then press S3 to enter.
Set the
DATE
by pressing S1 or S5 and then press S3 to enter.
Set the
12/24H
by pressing S1 or S5 and then press S3 to enter.
Select
M-D or D-M
(Month/Day or Day/Month) format setting by pressing S1/S5. Press S3 to enter and the watch will
go back to Time.
TIME 2 setting in SET mode:
You have two options in setting the watch,
GPS
or
MANUAL
. In manual setting, you can manually set the time. If you select
the GPS option, the watch will be automatically set base on the data and time data from GPS satellites.
The procedure in setting time 2 is the same with time 1 setting.
12H/24H format setting:
You can select
12H
or
24H
format. Press S3 to enter setting mode. Press S1 or S5 to select 12H or 24H format. Press S3 to
confirm and exit.
EXERCISE MODES
The watch has the following major exercise modes:
RUN
and
CHRONOGRAPH
modes.
RUN mode:
Press S1 or S7 from
TIME
mode to enter
RUN
mode. The watch will display the following in succession:
RUN
SEARCH GPS
BATTERY
level
DATA TRACK MEMORY
view 1
of
RUN
mode.
Also note that if the GPS is already
ON
when you enter the RUN mode, the watch will prompt GPS GO, CHRONO (00’00”00)
and the PACE (- -‘- -“). Press S1 to start/restart. Press S5 to stop. Press and hold S5 to save/reset. Press S7 to exit setting.
AUTO LAP / UNIT / USER setting in RUN mode:
While in Run mode, press and hold S11 until the “AUTO LAP” blinks. Press S1 or S5 to select any of the sub views: AUTO
LAP, UNIT and USER setting. Press S3 to enter selected sub-views. Press S1 or S5 to change the value. Press S3 again
to confirm setting. Press S7 to exit setting.
RUN
mode Views:
While CHRO is running, press and hold S3 will opt the User to change the
bottom view
in the display
(DISTANCE, PACE, SPEED, CALORIE, CLOCK and CHRONO).
Following are the various views that user can choose by pressing S3.
Example:
View 1
GPS GO/ CHRONO / Pace
View 2
CHRONO/ Pace / Distance
View 3
CHRONO/ Speed / Distance
View 4
CHRONO/ Calorie / Distance
View 5
CHRONO/ Clock / Distance
View 6
CHRONO/ CHRONO / Distance
View 7
CHRONO/ Distance / Distance
Note:
While in Run mode, then the GPS signal suddenly becomes weak or lost for any reason, the watch will display
LOST GPS signal until it receives GPS signal again.
When the Chronograph is stopped or reset, the GPS will automatically turn OFF after 15 minutes
