4.4) How to turn OFF the GPS
: If you wish to turn OFF the GPS, press and hold S7 in any mode for about 3 seconds and
the watch will momentarily display GPS OFF and then return to Time view.
Note:
When GPS is ON and CHRONO is running, User cannot turn OFF GPS.
GPS signals and its meaning:
You will hear a beep sound when the watch has received a GPS signal or when the GPS signal has been lost. LOST GPS
signal will also be displayed in the screen.
If no Satellite signal is received within 15 minutes, the watch will auto return to Time mode. Also note that when CHRONO is
stopped or reset, if no activity after 15 minutes it will automatically return to Time mode and while in Time mode, the GPS
icon blinks for 5 hours (means GPS is on standby mode or Warm start mode) and after 5 hours GPS icon will disappear
(means GPS is OFF).
Step 5) Go for a Run:
5.1) Using Run mode:
5.1.1)
Press S1 or S7 from Time mode to go to RUN mode.
5.1.2)
The watch will prompt you to
GPS GO
(if Satellite signal already received)
or
INDOOR
(if no signal received yet).
5.1.3)
The watch will also display the remaining
BATTERY
power level, remaining
DATA TRACK MEMORY
and then display view 1. Press S3 to change views.
5.1.4)
Press S1 to start/restart or to take lap. If auto lap function is set, the watch will
take lap automatically based on auto lap setting and there is a beep sound
during taking of auto lap.
5.1.5)
Press S5 to stop after completing your run.
5.1.6)
Press and hold S5 to save your run data.
Note:
When the chronograph is stopped or reset, after 15 minutes if no key operation
the GPS will automatically turn
OFF
and return to time mode.
5.2) Using Chronograph mode:
RUN
mode and
CHRONOGRAPH
mode has the same timer counter. When the chronograph is started or stopped in RUN
mode, the same thing happens in Chronograph mode. They just differ in the views. This mode is dedicated to chronograph,
lap time, exercise time, and distance travelled.
5.2.1)
Press S7 from
RUN
mode to go to
CHRO
mode.
5.2.2)
Press S1 to start/restart or take lap. If auto lap function is set, the watch will take
lap automatically based on auto lap setting and there is also a beep sound
during taking auto lap.
5.2.3)
Press S5 to stop after completing your run.
5.2.4)
Press and hold S5 to save your run data.
Note:
When the chronograph is stopped or reset, after 15 minutes if no key operation
the GPS will automatically turn
OFF
and return to time mode.
Step 6) Download your data to PC:
The watch comes with PC software to make communication between your watch and PC easy and enjoyable. Please install
the PC software to your PC using the installer provided. The watch is using a USB PC link cable to connect the watch to PC.
Run the GPS PC software on your PC. Plug the USB cable with the watch clamped in the other end of the cable. PC
software will then prompt you to download the data. Click the download button to begin downloading. The PC software will
prompt to delete the data in the watch. User has the option to delete the data in the watch or not.
The PC software installation and instruction guide can be found at the end of this manual. Please take time to read the
guide.
General Operations
The watch has the following main modes: Time, Run, Chronograph, RUN Data, Alarm and Set modes. Press S7 to scroll
through these modes.
