Watch reset:
The user can reset the watch by pressing and holding S1, S5, S7 and S11 simultaneously. All segments will be light on, then
EL backlight ON. The software code will be displayed. The watch will be reset. Below are the reset views.
EL backlight:
This watch has a
Night mode function
. Following are the options in SET mode and their functions:
10 SECONDS
– Press S11 will turn ON the Light for 10 seconds.
20 SECONDS
– Press S11 will turn ON the Light for 20 seconds.
NIGHT ON
– Light will continuously ON when GPS is ON and CHRONO is running from 6:00 pm to 7:00 am.
TIME MODE
Following are the views with the corresponding information displayed:
Time 1 or Time2, Month, Date, City code, Weekday and battery level indicator.
TIME / NIGHT / CONTRAST / CHIME setting in Time mode:
While in Time mode, press and hold S11 until the “TIME” blinks. Press S1 or S5 to select any of the sub views: TIME,
NIGHT, CONTRAST and CHIME setting. Press S3 to enter selected sub-views. Press S1 or S5 to select. Press S3 to
confirm. Press S7 to exit setting.
TIME 1 setting in SET mode:
You have two options in setting the watch,
GPS
or
MANUAL
. In manual setting, you can manually set the time. If you
select the GPS option, the watch will be automatically set based on the data and time data from GPS satellites.
In SET mode, press S1 or S5 for Time setting
Press S3 and Time 1 appears.
Press S1 or S5 for Time 1 or Time 2 setting
Press S3 to confirm
Select
GPS
or
MANUAL
setting by pressing S1 or S5 and then press S3 to enter.
