11
Assembly
5. Grease Cup Assembly
From the back, pull out grease tray (T),
remove any packaging materials from it,
then insert grease cup (U) into grease tray
(T) as shown in (Fig.15). Push grease tray
back into grill.
6. Installing Cooking Components
(a) Place flame tamers (N) over burners as
shown. Flame tamers ends insert into
channels on front and back of firebox.
(Fig. 16)
(b) Evenly space cooking grids (O) on the
ledge above flame tamers (N). (Fig.16)
(c) Insert legs of warming rack (P) into the
holes in the top of firebox side panels.
(Fig.16)
7. Battery Assembly
(a) Unscrew the ignition battery cap. (Found
at far left of control panel)
(b) Install battery (not supplied) into ignition
box with positive terminal facing outward.
(c) Replace the ignition battery cap after the
battery has been installed. (Fig. 17)
Fig.15
Fig.16
Fig.17
U
N
O
P
T
35
0
25
0
F
6 0
0
50
0
C
3 00
20
0
1 00
