7
Assembly
CAUTION: While it is possible for one person to
assemble this grill, obtain assistance from another
person when handling some of the larger, heavier
pieces.
Note: Be sure to slide grease tray out of back of grill
head and remove all packaging from tray.
Use the parts list to check that all parts have been
included.
1. Grill Cart Assembly
（
a
）
Attach four casters to bottom panel (B) using (16) 1/4
x15mm Phillips head screws (AA), (16) 1/4 lock washers
(FF). Note: (C) is Swivel Caster with Brake, (D) is Swivel
Caster, (E) are Straight Casters. (Fig.1)
Note: Make sure the flat side of straight casters face out to
the exterior side when attaching. As shown in see (Fig. 1).
Hint: For ease of caster assembly, turn bottom panel
upside down.
(b) Attach side panels, left & right (F&G) to bottom panel
(B) using (4) 5/32 x 8mm Phillips head screws (CC) with (4)
5/32 lock washers (GG). (Fig.2)
(c) Attach back panel (H) to bottom panel (B) using (3) 5/32
x 8mm Phillips head screws (CC) with (3) 5/32 lock washers
(GG). Attach back panel (H) to left & right side panels (F&G)
using (4) 1/4 x 10mm Phillips head screws (BB) with (4)1/4 lock
washers (FF) . (Fig.3)
Fig. 1
Fig. 3
Fig. 2
F
B
C
D
AA
FF
E
F
G
B
GG
G
F
H
B
CC
GG
FF
BB
F
CC
