Outback TPA101-3, Assembly & Operating Instructions

Page: 21 / 23

Is the gas supply or gas pressure low?
If it is only one burner that appears low, does
the orifice or burner need cleaning?
Is there adequate gas supply available?
Is the grill in a dusty area?
Is the fuel hose bent or kinked? Low heat with knob in “HI” position.
Refer to Clean Burner Tubes and Burner
Ports on page 20. Burner flame is yellow or orange, in
combination with the odor of gas.
Check to see if other burners operate. If so,
check the gas orifice on the malfunctioning
burner for an obstruction.
Do other burners on the unit operate?
Make sure the wire is connected to
electrode assembly.
Wipe with dry cloth.
Clean wires and/or electrode by rubbing
with alcohol and clean swab.
Check to see if LP tank is empty. Grill won’t light when the control knob
is rotated.
WHAT TO DO PROBLEMS
Countries of Use:
I
3+ (28-30/37) BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT, SK, SI
I3B/P(30) BE, CY, DK, EE, FI, FR, HU, IT, LT, NL, NO, SE, SI, SK, RO, HR, TR, BG, IS,
LU, MT,CZ
I3B/P(50) AT, CH, DE, SK
I3B/P(37) PL
Gas Consumption:
Comet : 1026g/h
Sear Side Burner: 321g/h
Butane:28-30 mbar
Propane: 37 mbar
LPG mixture:30 mbar
LPG mixture:37 mbar
LPG mixture:50 mbar 1.05mm
1.05mm
0.99mm
0.94mm
1 4.4kW CE0359
359CL1114
Sear Side Burner
Butane:28-30 mbar
Propane: 37 mbar
LPG mixture:30 mbar
LPG mixture:37 mbar
LPG mixture:50 mbar 0.92mm
0.92mm
0.89mm
0.84mm
4 14.06kW
CE0359
359CL1114 Comet
Gas/Pressure Injector
Burners Heat Input CE
Approval
Name
BEFORE CALLING FOR SERVICE
If the grill does not function properly, use the following checklist before calling for
service. You should inspect the burners at least once a year or immediately after any of
the following conditions occur
:
Technical Specifications
21
Troubleshooting