50
1. Podgrzać ekspres do kawy zgodnie z opisem zawar
-
tym w punktach 1–6.
2. Filtr do saszetek z kawą włożyć do obsady filtra.
Sprawdzić, czy jest założony prawidłowo.
3. Włożyć saszetkę do filtra, rys. D-9. Zalecane jest po
-
stępowanie zgodnie z instrukcjami umieszczonymi na
opakowaniu saszetek z kawą.
4. Włożyć obsadę filtra do jednostki zaparzacza.
5. Wziąć podgrzaną filiżankę i umieścić ją pod wylewką
w obsadzie filtra.
6. Sprawdzić, czy wskaźnik świeci (a nie miga) i nacisnąć
przycisk
, aby zrobić kawę. Kawa zacznie spływać
z wylotu kawy.
7. Zaczekać do zakończenia przyrządzania kawy i wyjąć
obsadę filtra. Wyjąć z niej zużytą saszetkę i filtr.
PRZYRZĄDZANIE CAPPUCCINO
1. Wziąć dużą filiżankę do cappuccino i przyrządzić kawę
zgodnie z opisem zawartym w punktach 1–10.
2. Przestawić przełącznik sterowania parą w położenie
,
rys. D-10. Gdy przycisk
przestanie migać, ozna
-
cza to, że warnik osiągnął wymaganą temperaturę.
Przestawić przełącznik w położenie
+
na 4–5 sekund,
aby wypuścić parę, a następnie przestawić go z powro
-
tem.
UWAGA:
Do wyjęcia filtra z obsady można użyć łyżki z
miarką albo innego filtra, rys. D-8.
3. Wziąć oddzielny pojemnik i nalać do niego około 90–
100 ml mleka na jedną porcję cappuccino. Należy
pamiętać, że w trakcie przyrządzania objętość mle
-
ka zwiększy się około 2-/3-krotnie.
Mleko musi być
schłodzone.
4. Aby zrobić cappuccino, należy umieścić pojemnik z
mlekiem pod wylotem pary, rys. D-11.
5. Zanurzyć rurkę wylotu pary w mleku na głębokość 2
cm, przekręcić przełącznik sterowania parą w lewo w
położenie
+
(na 1–1,5 min). Mleko zwiększy objętość i
nabierze konsystencji śmietany.
Maksymalny zalecany czas wypuszczania pary to
nie więcej niż 1,5 minuty.
6. Gdy mleko zwiększy objętość dwukrotnie, należy kon
-
tynuować jego podgrzewanie. Idealna temperatura to
60°С. Po osiągnięciu wymaganej temperatury należy
zatrzymać wypuszczanie pary, obracając przełącznik
w prawo w położenie
I
.
7. Wlać spienione mleko do filiżanki z kawą. W razie po
-
trzeby dodać cukru do smaku i posypać spienione mle
-
ko kakao w proszku lub czekoladą.
Para, wydostając się z wylotu, może wyrzucić
gorącą wodę. Ponadto wylot pary rozgrzewa
się do wysokich temperatur. Nie należy go do
-
tykać gołymi dłońmi.
Przestawić nieco przełącznik sterowania parą.
UWAGA:
Aby zrobić kawę po spienieniu mleka, koniecz
-
ne jest schłodzenie warnika, w przeciwnym razie kawa
się przypali.
Wylot pary należy czyścić po każdym użyciu.
Należy postępować zgodnie z instrukcjami, aby
uniknąć poparzenia.
Zmiana ilości przyrządzanej kawy
Przywracanie ustawień fabrycznych
GRZANIE WODY (NA HERBATĘ ITD.)
1. Włożyć wtyczkę urządzenia do gniazda zasilającego.
Nacisnąć przycisk
, wskaźnik przycisku będzie mi
-
gać w czasie nagrzewania urządzenia, a gdy urządze
-
nie będzie gotowe do użycia, zacznie świecić światłem
ciągłym.
2. Przełączyć przełącznik sterowania parą w położenie
,
rys. D-10. Gdy przycisk
przestanie migać, ozna
-
cza to, że warnik osiągnął wymaganą temperaturę.
Przestawić przełącznik w położenie
+
na 4–5 sekund,
aby wypuścić parę, a następnie przestawić go z powro
-
tem.
3. Wziąć pojemnik lub filiżankę z płynem przeznaczonym
do podgrzania. Umieścić filiżankę pod wylotem pary.
Zanurzyć rurkę wylotu pary w płynie na głębokość 2 cm.
4. Stopniowo przestawiać przełącznik sterowania parą w
położenie
+
.
Maksymalny zalecany czas wypuszczania pary
to nie więcej niż 1,5 minuty.
Jeśli ciśnienie pary/strumienia rośnie, należy przesta
-
wić przełącznik w położenie i zaczekać, aż przycisk
przestanie migać. W razie potrzeby powtórzyć te
czynności.
5. Po osiągnięciu wymaganej temperatury należy zatrzy
-
mać wypuszczanie pary, obracając przełącznik w pra
-
wo w położenie
I
. Zabrać filiżankę z podgrzanym pły
-
nem.
Wylot pary należy czyścić po każdym użyciu.
Należy postępować zgodnie z instrukcjami, aby
uniknąć poparzenia.
1. Aby zmienić ilość przyrządzanej kawy, umieścić 1 lub
2 filiżanki pod wylewką w obsadzie filtra, a następnie
nacisnąć i przytrzymać przycisk
lub
przez 3
sekundy. Kawa zacznie wypływać z wylotu kawy, gdy
przycisk zostanie zwolniony.
2. Ponownie nacisnąć przycisk
lub
. Kawa prze
-
stanie spływać do filiżanki. Ilość przyrządzanej kawy
zostanie zaprogramowana do użytku w przyszłości.
Aby przywrócić ustawienia fabryczne, należy nacisnąć jed
-
nocześnie i przytrzymać przez 3 sekundy przyciski
oraz
. Wskaźnik przycisku nie będzie w ogóle świecić.
Para, wydostając się z wylotu, może wyrzucić
gorącą wodę. Ponadto wylot pary rozgrzewa
się do wysokich temperatur. Nie należy go do
-
tykać gołymi dłońmi.
Przestawić nieco przełącznik sterowania parą.
Jeśli ekspres do kawy nie jest używany przez 30 minut, au
-
tomatycznie się wyłącza. Wszystkie wskaźniki przycisków
gasną. Aby wyłączyć ekspres do kawy, należy nacisnąć
przycisk
.
Funkcja automatycznego wyłączania
Summary of Contents for EM1900
