OUMAN OUFLEX M BA User Manual Download Page 1

Page: 1 / 20

YM0015B: Version 2.6->

YM0015D: Versio 2.9->

USER MANUAL

OUFLEX M BA

• Application and user interface are freely

programmable with Ouflex BA Tool.

• You can load the application to the control-

ler by using SD-card, USB-port or remotely
via the M-LINK.

Web

via M-LINK

REMOTE

UPDATE

via M-LINK

• DIN rail-mounted module casing (6M)

• Detachable strip connectors make

installation easier.

• Can be as a master device and slave

device in the Modbus bus.

Compact freely programmable automation unit

Ouflex M BA has SMS support.

Use of a text

messages requires that the GSM modem (op-

tional) is connected to the controller.

You can communicate with the controller by

text message using key words.

Key words:
Active alarms
Alarm history

KEY WORDS

Saving energy, creating comfort

Summary of Contents for OUFLEX M BA





















Search results

Summary of Contents for OUFLEX M BA

Reviews:

Related manuals for OUFLEX M BA

Brands by name

Popular brands

OUMAN OUFLEX M BA, User Manual

Search results

Summary of Contents for OUFLEX M BA

Reviews:

Related manuals for OUFLEX M BA

Brands by name

Popular brands