2
2
To go back to the previous window:
Press the ESC button under the
cover or click OK in the bottom
menu bar <--.
Not used
Not used
Not used
Buttons under the front cover
You can use this button to move up
through the menu or to increase a
setting value.
You can use OK
button to
switch to editing settings for the
currently selected function or to
confirm changes to setting values.
You can use this button to move
down through the menu or to de-
crease a setting value.
Alarm notice
The Ouman Ouflex M BA controller may emit alarms. Alarm de
-
tails are highlighted on the screen in failure mode, and the beeper
sounds.
When there are more than one unacknowledged alarms in the con-
troller, information on the most recent alarm is highlighted on the
screen. After all active alarms are acknowledged, the display quits
the failure highlight mode and the beeper stops.
The beeper can be turned off with active alarms present by press
-
ing the ESC button. When you do so the window with details of the
most recent alarm on the screen will close.
To view active alarms, go into the menu
"Alarms -> Active alarms". Unacknowledged alarms are marked with
an exclamation mark at the start of the line.
Some of the information in your Ouflex M BA device may be hidden.
You can see the hidden menus by pressing OK for a few of seconds.
Similarly, you can hide them again by pressing OK for a few of sec-
onds. Hiding information that you seldom need to change or look
into makes the UI simpler. When visible, this information is shown
indented.
There may be a maintenance code in use in your Ouflex M BA de
-
vice. In this case, you can see the information even when it’s locked,
but you can’t make changes to settings without entering the main
-
tenance code. Normally, you lock the most critical settings behind
the maintenance code, or settings that require expertise.
There is a
symbol in front of a setting that requires maintenance
code.
Press OK for a
few seconds
Hidden menus
Maintenance code
•
A blinking exclamation mark indi
-
cates active alarms in the device.
•
The number shows the quantity
of active alarms.
Alarm indication
OUFLEX M BA
2
Alarm acknowledgement: press
the OK button. The beeper will
be turned off. If the cause of the
failure is not fixed, the exclamation
mark in the upper right corner of
the display will keep blinking.
