background image

18

Optional accessories

M-LINK

M-Link is an Ouflex M BA adapter that is providing Modbus TCP/IP 

interface to Ouflex M BA

•  Integrated Ouman Access connection

• 

Modbus TCP/IP

• 

Modbus TCP/IP 

 RTU Gateway

•  SNMP alarm transfer

Additional Control panel, Ouman LCD

The external display is connected to the RJ12 connector under 

the flap cover.  Use Ouman cable LCD CABLE M.

GSM-modem

By connecting the modem to the Ouflex M BA  you can communi

-

cate with SMS’s to the controller and have information of acti

-

vated alarms to GSM phone.

Ouman’s GSM modem is connected to the COM3 port (RJ45) of 

Ouflex M BA unit.  The modem has a fixed antenna that can be 

changed to an external antenna with a 2,5m cord (optional equip

-

ment) if needed. The modem’s indicator light shows what mode it 

is in.

Inserting the SIM card

Set the SIM card to SIM-slot that is in the side of the modem, so 

that circuit of the SIM-card is facing towards the sticker that is on 

the top of the modem. Press the SIM-card until the slot snaps and 

card is properly attached to slot. The SIM-card can be removed 

by using a flat object such as a screwdriver with flat-head.

To be able to use the SMS-connection, the PIN code has to be in

-

stalled in the controller. Note. The controller is given the same PIN 

as that of the SIM card.  The SIM card’s PIN query must be on.

Product disposal

The enclosed marking on the additional material of the product indicates that this prod

-

uct must not be disposed of together with household waste at the end of its life span. 

The product must be processed separately from other waste to prevent damage caused 

by uncontrolled waste disposal to the environment and the health of fellow human be-

ings. The users must contact the retailer responsible for having sold the product, the 

supplier or a local environmental authority, who will provide additional information on 

safe recycling opportunities of the product. This product must not be disposed of to

-

gether with other commercial waste.

RJ-45 -connector to the GSM-modem 

Attention! This is RS232 serial port not 

ethernet

21

22 32 42

25

62 72 82 29 03 13 23 33 43 53 63

37

83 93 04

41

24 34 44

45

64 74 84 49 05 15 25 53 45 55 65

57

85 95 06

SIM card 

slot

Summary of Contents for OUFLEX M BA





















Reviews: