Otto P 600 B-2, User Manual

Page: 8 / 55

8
English
1.1. Technical details
Model Basic
setup
Cartridge Soft-pack Cartridge
(ml)
Soft-pack
(ml)
L
(mm)
H
(mm)
D
(mm)
Net
Weight (g)
Total
Mass (g)
Connec-
tion
Pressure
Maxim
CSG II 210
- -
≤ 310
-
260 263 78 705 1045 1/4"GAS
maschio
10 Bar
145 psi
CSG II 245
For
soft-pack
≤ 310 ≤ 400 307 263 78 1125 1420
1/4"GAS
maschio
10 Bar
145 psi
CSG II 270
- - -
≤ 400 307 263 78 1100 1395 1/4"GAS
maschio
10 Bar
145 psi
CSG II 370
For
soft-pack
≤ 310 ≤ 600 410 263 78 1300 1565
1/4"GAS
maschio
10 Bar
145 psi
CSG II 400
- - -
≤ 600 440 263 78 1100 1365 1/4"GAS
maschio
10 Bar
145 psi
CSG II 450
For
cartridge
≤ 310 ≤ 400 556 263 78 1300 1660
1/4"GAS
maschio
10 Bar
145 psi
CSG II 660
- - -
700 665 263 78 1270 1570 1/4"GAS
maschio
10 Bar
145 psi
CSG II 1100
- - -
1800
1150
263 78 1700 2030
1/4"GAS
maschio
10 Bar
145 psi
#
USER’S INSTRUCTIONS FOR CSG II SERIES MODELS: 210 - 245 - 270 - 370 - 400 - 450 - 660 - 1100
* The various products are differentiated by the tube length and the extruded product type.
1. PRODUCT DESCRIPTION
1) Body of the Applicator
2) Front ring nut
3) Control lever
4) Handle
5) Pressure regulator
6) Feeding: ¼ gas male threaded connector
7) Material holder tube
8) Dump valve
9) Rear ring nut
10) CE mark
11) Exhaust air outlets
12) Safety hole
PNEUMATIC APPLICATOR
mod. - xxx/xxx xx - cod. xxxxxxx
P.M.T. srl con unico socio
Via G.Marconi 3/7 - 24051 Antegnate (BG) ITALIA
MAX PRESSURE 10 bar (145 psi)
mese - anno
FAC-SIMILE
* Cartridge based conversion kit : plastic spacer with gasket (included in the supply).
**
Bag based conversion kit
: bag holder, tube scraper, piston collecting soft-pack, soft-pack awards cone (included in the supply).
1.2. Noise emissions and vibrations
When releasing the lever, the level of equivalent A-weighted sound pressure, measured at a 50 cm. horizontal distance during
the application of a sealant and with a gun feeding pressure of 6 Bar / 87 PSI is > 80 dBA. Therefore the use of ear defenders is
recommended. The hand/arm system vibration level was detected on an equivalent model and it is less than 2,5 m/g2.
1.3. Storage
The applicator is supplied in a single KEB WHITE ST/B343 cardboard box, with a 2.8-3 mm. thickness low flute; the gun is held in a
polyethylene bag. Keep at a temperature between -5°C and 45°C, with ambient humidity not exceeding 70%.
Never remove the pressure reducer from the machine in an attempt to increase the inlet pressure. The applicator is
safe up to 10 bar 145 PSI. Do not use any other expedient to increase the pressure.
To properly use the applicator, with one hand, hold the back of the material tube up against the nut and with the
other, grasp the grip to operate the control lever.
# Basic setup
: It is the mode with which the gun is assembled at the factory and provided to the client.
2
12
3
2
5
1
10
8
7
9
5
6
4
3
2
1
4
6
9 8
7
H
L
D