Otto Bock Terra Flair Plus, Instructions For Use Manual

Page: 7 / 32

7
Component Figure Function
Rest suspension foam base,
anatomically shaped see fig. 3 Lateral and medial thigh support, pos­
tural stability through secure positioning
of the legs
High air insert with dry float­
ation
1)
see fig. 4 Encloses and envelopes most sensitive
bony areas more effectively for optimal
pressure redistribution under these
areas
Cover made of PU-coated
fabric with two-way stretch,
liquid-repellent, with elastic
pockets on the inside for
secure positioning of the
foam wedges between the
cover and foam base see fig. 2; see fig. 6,
top Suitable for incontinence
Foam wedges (3x) see fig. 6, bottom Additional optional positioning and sta­
bilisation of the thighs
1)
The dry air floatation principle enables weight to be distributed evenly without shear forces.
3 Intended use
The safe use of the product can be ensured only if it is used as intended in accordance with the
information contained in these instructions for use.
3.1 Indications for use
The product is intended exclusively as a wheelchair seat cushion for adults with intact skin who
use a wheelchair on a temporary or permanent basis.
The optimally suited seat cushion must be selected by trained, qualified personnel depending on
the size and individual sitting needs of the user. It may only be used with a wheelchair in the
appropriate size.
The allowed user weight is
35 kg [77 lbs] to 150 kg [330 lbs]
. We assume no liability if the
product is used outside the allowed user weight range.
3.2 Indications
• Increased decubitus risk
3.3 Contraindications
3.3.1 Absolute Contraindications
• None known
3.3.2 Relative Contraindications
If redness of the skin or other problems occur during use, consult a physician or therapist as
soon as possible.
3.4 Further Usage Restrictions
The product is designed for use by one person only. Re-use of the product is not permitted due
to hygiene considerations.
3.5 Qualification
This product may only be selected and adapted by qualified personnel. Compliance with all man­
ufacturer specifications and all applicable legal provisions is required. Please contact the
manufacturer’s service department for further information (see inside or outside of rear cover for
addresses).