Otto Bock Dino 3, Instructions For Use Manual

Page: 28 / 32

Load depending on equipment
Equipment Maximum load [kg (lbs)]
1)
Standard equipment 120 (264)
With leg support with single-panel foot plate for seating
shell interface (steel) 50 (110)
With parallel seating shell interface (frame width
360 mm) 75 (165)
With parallel seating shell interface (frame width
400–450 mm) 100 (220)
1)
Varies according to the selected options and model
Permissible tyre pressure for pneumatic tyres
INFORMATION
Note the safety notices regarding air pressure and tyres.
Wheel Wheel size ["] Tyre pressure [bar (kPa; psi)]
1)
Caster wheel 7 2.4 (240; 35)
Rear wheel 12.5 2.5 (250; 36)
22 4.5 (450; 65) Drive wheel
24 6 (600; 87)
1)
Also see print on the tyre wall
Dimensions for different wheel sizes
Dimensions 12.5" rear wheel 22" drive wheel 24" drive wheel
Min. wheelbase [mm (")] 770 (30.3) 800 (31.5) 825 (32.5)
Max. wheelbase [mm (")] 770 (30.3) 930 (36.6) 955 (37.6)
Max. length including leg support [mm (")] 830 (32.7) 1,150 (45.3) 1,180 (46.46)
Overall width [mm (")]
Size 1/frame width: 360 (14.2) 540 (21.3) 615 (24.2)
Size 2/frame width: 400 (15.7) 580 (22.8) 655 (25.8)
Size 3/frame width: 440 (17.3) 620 (24.4) 695 (27.4)
Ambient conditions
Temperatures and relative humidity
Temperature during use [°C (°F)] -10 to +40 (14 to 104)
Transport and storage temperature [°C (°F)] -10 to +40 (14 to 104)
Relative humidity [%] 45 to 85; non-condensing
13 Appendices
13.1 Required tools
The following tools are required for adjustments and maintenance work:
•
Allen wrenches in sizes 3, 4, 5, 6
• Ring and open-end wrenches in sizes 8, 10, 13, 19 and 24
• Phillips head screwdriver (size: 2)
• Screwdriver (blade width: 3 mm)
• Torque wrench (measurement range 3–50 Nm)
13.2 Torque values of the screw connections
Unless otherwise specified, screw connections are tightened with the following torque values:
•
Thread diameter M4: 3 Nm
• Thread diameter M5: 5 Nm
• Thread diameter M6: 10 Nm
28
Appendices
Dino 3