Otto Bock Dino 3, Instructions For Use Manual

Page: 27 / 32

The design, manufacturing and requirements for the intended use of the product are based on the expected life­
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.
12 Technical data
INFORMATION
► Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe­
cified – cannot be adjusted in the mm range but only in increments of approx.
0.5 cm
or
1 cm
.
►
Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be
±10 mm and ±2° .
INFORMATION
► Some of the measurements indicated below are values that were theoretically determined.
►
Note that not all adjustment possibilities can be used with all product versions. Furthermore, the adjustment
combinations are limited by the compact frame geometry.
► Technical changes and tolerances are reserved by the manufacturer.
General information
Dimensions, weights Minimum Maximum
Total weight [kg (lbs)] 14.5 (32) 27.5 (60.6)
1)
Weight of the heaviest removable component:
• 24" drive wheel [kg (lbs)]
--- 1.8 (4)
Overall length (with leg support) [mm (")] 830 (32.7) 1,180 (46.5)
Overall width [mm (")] 540 (21.3) 695 (27.4)
Overall height (with quick-release axles) [mm (")] 965 (38) 1,400 (55.1)
Static stability, uphill [° (%)]
2)
--- 10 (17)
Static stability, downhill [° (%)]
2)
--- 10 (17)
Static stability, sideways [° (%)]
2)
--- 10 (17)
Seat bottom angle (seat tilt) [°] -5 +30
Seat depth [mm (")]
3)
345 (13.5) 495 (19.5)
Seat width [mm (")]
3)
360 (14.2) 440 (17.3)
Front seat height [mm (")]
3)
435 (17.1) 485 (19.1)
Back support angle [°] 80 120
Back support height [mm (")]
3)
--- 550 (21.6)
Distance foot plate to seat bottom [mm (")]
4)
200 (7.9) 580 (22.8)
Angle leg support to seat bottom [°]
4)
5 90
Handrim diameter [mm (")]
5)
490 (19.3) 540 (21.3)
Horizontal axle position [mm (")] 150 (5.9) 300 (11.8)
Minimum turning radius [mm (")] 750 (29.5) ---
Adjustment range, push handles/push bars [mm (")] --- ~ 160 (6.3)
Wheels Size ["] Tyres
5.5 Elastic PU
6 PU
Caster wheel
7 Pneumatic
Rear wheel (transport chair) 12.5
22
Drive wheel (self-propelled)
24
PU/pneumatic
1)
With maximum installation of accessories
2)
Depending on seat positioning and anti-tipper setting
3)
In reference to seating shell mobility base without seating unit
4)
Depending on leg support and seating unit
5)
For 22"/24" drive wheels
27 Dino 3
Technical data