►
Assembly, adjustment and maintenance operations may only be com
pleted by qualified personnel.
►
Observe the alignment, assembly and adjustment instructions.
CAUTION
Excessive strain due to use on more than one patient
Risk of injury and loss of functionality as well as damage to the product
►
Use the product on only one patient.
►
Observe the maintenance recommendations.
NOTICE
Thermal overloading of the product
Damage due to improper thermal treatment
►
Do not carry out any heat treatment on aluminium at temperatures
above
150 °C
.
►
Do not carry out any heat treatment on steel at temperatures above
300 °C
.
►
Prior to thermal treatment, remove all temperature-critical components
(such as plastic parts).
NOTICE
Exposure of the product to unsuitable environmental conditions
Damage, brittleness or destruction due to improper handling
►
Avoid storage in condensing ambient humidity.
►
Avoid contact with abrasive substances (e.g. sand, dust).
►
Do not expose the product to temperatures below -10 °C (14 °F) or
above +60 °C (140 °F) (e.g. sauna, excessive sunlight, drying on a
radiator).
5 Preparing product for use
Orthosis alignment
►
For the upper and lower leg area, select suitable materials to reduce the
torsional stress on the orthosis.
►
Use the 743Y57=1-* alignment insert for the correct alignment of the
orthosis joints.
12
