OTT Orpheus Mini, Operating Instructions Manual

Page: 3 / 44

Table of contents
1 Scope of supply 4
2 Order numbers 4
3 Basic safety information 5
4 Introduction 6
5 Installing, checking, and exchanging batteries 8
6 Installing the OTT Orpheus Mini 10
6.1 Installing in 1" observation wells 12
6.2 Installing in 2", 3", 4", 5" or 6" observation wells,
top cap with adapter plate recess 13
6.3 Installing in observation wells beginning at 2" diameter,
top cap without adapter plate recess 15
6.4 Installing in observation wells beginning at 2" diameter without a top cap 17
7 Adjusting the OTT Orpheus Mini operating parameters 18
7.1 Installing the OTT Orpheus Mini operating program 18
7.2 Setting up the PC/OTT Orpheus Mini communication link 18
7.3 Adjusting the OTT Orpheus Mini operating parameters 20
7.4 Storing/loading the OTT Orpheus Mini configuration 22
7.5 Importing/exporting the OTT Orpheus Mini configuration 23
8 Determining and displaying instantaneous values (observer function) 25
9 Downloading data 27
10 Exporting data 28
11 Displaying data 29
12 Protecting the OTT Orpheus Mini and OTT Orpheus Mini
operating program with a password 30
13 Date and time settings 32
14 Deleting the data memory 33
15 Updating the OTT Orpheus Mini firmware 33
16 Maintenance work 34
16.1 Cleaning the pressure probe 34
16.2 Replacing the desiccant capsules 35
16.3 Checking/replacing the batteries 35
17 Error messages 36
18 Troubleshooting/fault correction 36
19 Repair 37
20 Note about the disposal of old units 37
21 Technical data 38
Appendix A – Declaration of conformity OTT Orpheus Mini 40
3