How to open the Observer function
Start the operating program.
Establish the PC/OTT ecoLog 500 (3G) communication link, refer to Chapters
9.2 or 9.3.
Depending on the option set: In the start window of the operating program,
either select "View Instantaneous values" or "Setup device" and in the sub -
sequent window, select the "View Instantaneous values" function in the "OTT
ecoLog 500 (3G)" menu
➝
The OTT ecoLog 500 (3G) starts an instantaneous
value measurement and the "Observer" window opens:
If necessary: Input Observer registration into the entry field of the pressure sen-
sor and click on the "Store" button.
If necessary: Start new instantaneous value measurement: click on the "Refresh"
button ("
Automatic refresh" starts an instantaneous value measurement
every 5 seconds).
Exiting the Observer: Click the "Exit" button and close the operating program.
Notes
The OTT ecoLog 500 (3G) stores each call of the Observer function in an info
channel with date and time. After reading in and accepting into the OTT
Hydras 3 user software, this information can be displayed in the evaluation
window of a sensor using the "Info Data" > "Station" > Displays" function
("Observer registration general"). Similarly, they are visible via the "View
data" > "Table" function of the operating program.
If the "
Do not calculate manual input value with scaling" check box in the
"Options" window is enabled, the OTT ecoLog 500 (3G) also saves the input
check value as well as the current instantaneous value. After reading in and
accepting into the OTT Hydras 3 user software, this information can be dis-
played in the evaluation window of a sensor using the "Info Data" > "Sensor"
> "Displays" function ("Observer registration with check value). Similarly, they
are visible via the "View data" > "Table" function of the operating program.
Fig. 19: Display/input window "OTT Water
Logger Operating Program – Observer".
The window displays the current
instantaneous value for all measurements.
Furthermore, the window displays the sensor
number/name, the current battery voltage,
the amount of power used from the batteries
up to now, and the date and time.
35
Summary of Contents for ecoLog 500
Page 1: ...Operating instructions Groundwater Datalogger OTT ecoLog 500 OTT ecoLog 500 3G English...
Page 53: ......
Page 54: ......
Page 55: ......