Connect the lithium battery plug to the socket of the electronic unit, as shown in
figure 3.
Open the Velcro strip of the battery compartment.
Insert the lithium battery into the battery compartment (D type lithium battery:
insert the battery into the right-hand side (top) of the battery compartment; the
wiring of the D type lithium battery below the heat-shrinkable tubing must be
located at the side or bottom.)
Firmly close the Velcro strip around the lithium battery.
Slide the cap and the pipe casing of the communication unit back up to the
stop.
Please note:
Do not bend or pinch the battery lead.
Reinstall the screw fitting to the communication unit.
Battery compartment
Socket
Plug
Electronic unit
Velcro strip
Lithium battery, DD type
Lithium battery, D type
Fig. 3: Inserting the lithium battery.
13
Summary of Contents for ecoLog 500
Page 1: ...Operating instructions Groundwater Datalogger OTT ecoLog 500 OTT ecoLog 500 3G English...
Page 53: ......
Page 54: ......
Page 55: ......
