10. POWER-ON OPTIONS
These options are intended to enable the user to customize the audiometer
to his/her own special requirements.
The following functions may be controlled via the Power-On Options Menu:
!
Enable User-Programming
!
Define Pulsed Tone timing parameters
!
Configure and test RS232C serial port and communication with PC
!
Select Language
!
Select and set up Printer
10.1 ACCESSING POWER-ON OPTIONS
To access the Power-On options, depress Softkey 3 while at the same time
powering on the audiometer and hold the button down until the Power-On
Options Menu appears on the display:
SOFTKEY 3
User Progr. Parameters:
(Menu=Quit)
Pulsing
RS232
Progr.
Lang.
Printer
Select the required option by pressing the corresponding softkey and
continue as directed by the instructions on the display.
Return to the previous menu by pressing
MENU
.
MENU
Pressing
MENU
while the display shows the Power-On Options Menu
returns the audiometer to normal operation.
Press
MENU
to Exit
10.2 PULSING
Select Pulsing by pressing Softkey 1 and the following menu will be
displayed:
Pulsing Parameters:
Rate
Duration
SOFTKEY 1
MIDIMATE 622 OPERATION MANUAL
10. Power-On Options
57
