B_EU_EMP_en.doc
ÖSTLING Markiersysteme GmbH
Operation manual EMP
19
3.3 Preparing the marking head
A black/white marking is possible on most of the metals, see page 35.
1 Marking
head
2 Cartridge
3 Black
felt
4 Conductive
net
5
Stencil glued on stencil cover
Marking head for black/white markings
Fig. 10103
1. Tailor black felt (3) to the size of the surface of the marking head (2).
2. Tailor conductive net (4) so that it gets over approx. 15 mm at all sides of
the marking head.
3. Place the felt onto the marking head.
4. Lay the conductive net over the felt.
5. Clamp the felt and conductive net with the cartridge (3).
6. Attach the marking head to the EMP/MODULMAT (4, Fig. 10102, page 12).
7. Attach the stencil glued on stencil (5) to the stencil holder (3, Fig. 10102,
page 12).
Black/white
marking
