B_EU_EMP_en.doc
ÖSTLING Markiersysteme GmbH
Operation manual EMP
14
2.3 Accessories
The equipment can be supplied with an optional hard metal output. 10 V, AC
are impressed permanently on the hard metal output. This tension cannot be
adjusted.
A hard metal output is suitable for marking hardened materials e. g. tools. With
the use of the hard metal output better results can be obtained on such
materials as with the use of the standard connections.
Except an ÖSTLING long-term stencil also short-time stencils can be used
In order to make your own short-time stencils for frequently changing texts very
fast and flexibly, the following accessories are available:
•
Stencil production system ÖSTLING PT (different versions).
•
9-pin printer with Software Stencil Creator.
For further technical support please contact our technicians. They answer gladly
your questions about different marking heads and further accessories like e. g.
customized devices or installation of the equipment into your production line.
3 Set-up
3.1 Set the input voltage
The preset input voltage (115 V or 230 V) can be set finely for adjustment to
other electricity mains. The following input voltages are available:
•
110
V.
•
120
V.
•
220
V.
•
230
V.
•
240
V.
The marking equipment must be opened for fine adjustment of the input
voltage!
Danger of electric shock.
¾
Only an electrician is allowed to adjust the input voltage.
¾
Before opening the equipment pull the line cord.
Hard metal
output
Types of stencils
