www.oster.com
www.oster.com
9
10
AFTER USING YOUR JUICE EXTRACTOR
Before cleaning and storing your juice extractor, follow the
instructions below to disassemble the unit:
• Turn juice extractor off “O” and unplug it from the electrical
outlet (Figure 1)
• Remove the jar and the pulp collector container by tilting it
slightly (Figure 2)
• Unlock the safety locking arms to release the cover/lid (Figure
3)
• Lift the lid up and remove it from the juice extractor (Figure 4)
• In order to remove the filter basket and the filter, hold the filter
basket with two hands and then lift it straight up (Figure 5)
WARNING: THE STAINLESS STEEL FILTER BASKET CONTAINS
SMALL SHARP BLADES TO CUT AND PROCESS FRUITS AND
VEGETABLES. DO NOT TOUCH BLADES WHEN HANDLING THE
FILTER BASKET.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
CARE & CLEANING
CLEANING
All parts are removable and dishwasher safe, with the exception of
the motor base.
• After disassembling all removable parts of the juice extractor,
wash them by hand with warm soapy water or in the
dishwasher (top shelf only). If the pulp dries out in the pulp
collector container, the filter or the filter basket, let it soak in
water for approximately 10 minutes before washing it
• Wipe the motor base with a damp cloth It is very important to
keep the filter very clean, free of residues blocking the holes in
order to ensure optimal performance
• Use a nylon brush (not included) to clean
it thoroughly, if necessary. If the holes in
the mesh remain blocked, soak the filter in
hot water with a water solution with 10%
lemon juice
NOTE: DO NOT IMMERSE THE MOTOR BASE
IN WATER OR ANY OTHER LIQUID.
MAINTENANCE
• Some plastic parts might stain when in contact with some
fruits and vegetables for too long. In order to avoid this from
happening, all parts should be washed immediately after each
use
3157 series_13ESM1.indd 9-10
9/27/13 3:04 PM