One Stop Systems
OSS-KIT-EXP-61611-XM | 31
4 Hardware & Technical Info
4.1
LED Definitions
LED
Descriptions
Status (Solid Green, OFF, Blinking)
D1 (CHO)
Cable Link LED
Solid Gen4, Blink 2Hz is Gen3, 1Hz is Gen2, 0.5Hz is Gen1
D3 (CH1)
Cable Link LED
Solid Gen4, Blink 2Hz is Gen3, 1Hz is Gen2, 0.5Hz is Gen1
D8 (CH2)
Cable Link LED
Solid Gen4, Blink 2Hz is Gen3, 1Hz is Gen2, 0.5Hz is Gen1
D7 (CH3)
Cable Link LED
Solid Gen4, Blink 2Hz is Gen3, 1Hz is Gen2, 0.5Hz is Gen1
D11 (CE)
Card Edge Link LED
Solid Gen4, Blink 2Hz is Gen3, 1Hz is Gen2, 0.5Hz is Gen1
D10
Power
Blinks when FPGA program running properly
LED0
Debug LED
Not defined, always on
LED1
Debug LED
Not defined, always on
LED2
Debug LED
Not defined, always on
LED3
Debug LED – would be used for CMI
Not defined, always on
4.2
Dipswitch Settings
SW1-5 must always be ON. Auto mode not supported
SW2-3 to 6 is not used.
Legacy backplane: Magma Gen3 backplane
