One Stop Systems
OSS-KIT-EXP-61611-XM | 30
Photo below is the link LED on the Host card, set to x4 and with single cable connected to PORT #2.
Photo below is the link LED on the Host card, set to x4 and with single cable connected to PORT #3.
LED
Status
Description
CH0 or CH1 or CH2 or CH3
ON (Solid Green)
There is a link between Host and Target cards.
Either CHO or CH1 or CH2 or CH3 LED will be ON, depending where the
cable is connected on the port of the HOST CARD.
CH3 Link LED
Single x4 cable is connected to TOP PORT#0
CH2 Link LED
Single x4 cable is connected to PORT#1
CH1 Link LED
Single x4 cable is connected to PORT#2
CHO Link LED
Single x4 cable is connected to Bottom PORT#3
LED0 (D2), LED1(D4), LED2(D6); LED3(D8)
ON (Solid Green)
Power Good
CE(D11)
ON (Solid Green)
The CARD EDGE connector is communicating to Gen4 PCIe switch on the
host computer motherboard.
Blinking Green: The CARD EDGE connector is communicating to Gen3 PCIe
switch on the expansion board / backplane.
D10
ON (Blinking Green)
Power Good / FPGA Healthy
D9
ON (Solid Green)
AUX Power Good
DANGER or STOP
Do not remove or uninstall the Host and Target cards while the system is ON. Turn OFF the system first before
uninstalling the cards.
