One Stop Systems
OSS-KIT-EXP-61611-XM | 25
3.5.4
Disconnecting the cable
To disconnect the link cable, pull back the PLASTIC thumb tab to release metal pins while slowly pulling the cable out.
3.6
Turn ON the Expansion system / unit
Flip the power supply switch to ON position. LED1, LED2, LED3, LED4 are always ON (solid green).
CE (D11): will be ON, either solid green or blinking depending on the PCIe Gen on the expansion board.
PWR (D1: will be blinking when FPGA program is running properly.
AUX: Solid green
LED1, LED2, LED3, LED4, PWR and CE LEDS:
AUX LED
Stand-by Mode LED:
During “Stand-by Mode” (awaiting to power ON) you will only see four LEDs on the Host and Target cards. These are the LED1, LED2, LED3 and
LED4.
