LEXPERT PROFILE L
12
Network
To select the
Network
, press the
ENTER
button to show
Network
on the display. Use the
DOWN
/
UP
button to select the
IP
or
Mask
. Once the mode
has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again. Hold and press
the
MENU
button for one second or wait for one minute to exit the menu mode.
Art-net
To select the
Art-net
, press the
ENTER
button to show
Art-net
on the display. Use the
DOWN
/
UP
button to select the
Net, Sub Net
or
Universe
. Once
the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again. Hold
and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Repeat on DMX
To select the
Repeat on DMX
, press the
ENTER
button to show
Repeat on DMX
on the display. Use the
DOWN
/
UP
button to select the
Yes
or
No
.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again.
Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Display Settings
To select the
Display Settings
press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
Display Inverse, Black Light Auto, Off Lumi-
nosity, Contrast
or
Temperature Unit.
Display Inverse
To select the
Display Inverse
, press the
ENTER
button to show
Display Inverse
on the display. Use the
DOWN
/
UP
button to select the
Yes
or
No
.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again.
Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Black Light Auto
To select the
Black Light Auto
, press the
ENTER
button to show
Black Light Auto
on the display. Use the
DOWN
/
UP
button to select the
Yes
or
No
.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again.
Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Off Luminosity
To select the
Off Luminosity
, press the
ENTER
button to show
Off Luminosity
on the display. Use the
DOWN
/
UP
button to adjust Luminosity from
1
to
10
. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button
again. Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Contrast
To select the
Contrast
, press the
ENTER
button to show
Inverted
on the display. Use the
DOWN
/
UP
button to adjust Contrast from
1
to
30
. Once the
mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again. Hold and
press the
MENU
button for one second or wait for one minute to exit the menu mode.
Temperature Unit
To select the
Temperature Unit
, press the
ENTER
button to show the
Temperature Unit
on the display. Use the
DOWN
/
UP
button to select the
°C or
°F
. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again.
Press and hold the
MENU
button about one second or wait for one minute to exit the menu mode.
Frequency
To select the
Frequency
, press the
ENTER
button to show the
Frequency
on the display. Use the
DOWN
/
UP
button to select the
600Hz, 1200Hz
,
1800Hz, 2400Hz
,
3000Hz
,
3600Hz, 4200Hz, 4800Hz
. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions
without any change press the
MENU
button again. Press and hold the
MENU
button about one second or wait for one minute to exit the menu mode.
Informations
To select the
Informations
press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
Firmware, Network, Art-net, DMX Value ,Fan
Speed, DMX in Rate, Frequency, I out, Hours
or
Device ID.
Firmware
To select the
Firmware
, press the
ENTER
button to show
Firmware
on the display and the display will show the version of software of the unit. To go back to
the functions without any changes press the
MENU
button again. Hold and press the
MENU
button for one second or wait for one minute to exit the menu
mode.
Network
To select the
Network
, press the
ENTER
button to show
Network
on the display. Use the
DOWN
/
UP
button to select the
IP , Mask
or
DHCP on/off
.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again.
Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Art-net
To select the
Art-net
, press the
ENTER
button to show
Art-net
on the display. Use the
DOWN
/
UP
button to select the
Net, Sub Net
or
Universe
. Once
the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again. Hold
and press the
MENU
button for one second or wait for one minute to exit the menu mode.
DMX Value
To select the
DMX Value
, press the
ENTER
button to show
DMX Value
on the display. Use the
DOWN
/
UP
button to select the
Dimmer, Dimmer Fine,
Summary of Contents for ADB Stagelight LEXPERT PROFILE L
Page 10: ...LEXPERT PROFILE L 10...
