LEXPERT PROFILE L
14
Slave Mode
To select the
Slave Mode
, press the
ENTER
button to show
Slave Mode
on the display. Use the
DOWN
/
UP
button to select the
Master
or
Slave
. Once
the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again. Hold
and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Factory Setting
To select the
Factory Setting
, press the
ENTER
button to show
FACTORY SETTING
on the display, use the
DOWN
/
UP
button to select
No
(keep the
present setting) or
Yes
(the fixture will reset to factory settings and exit menu mode). To go back to the functions without any changes press the
MENU
button again. Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
8. HOW TO CONTROL THE UNIT
You can operate the unit in five ways:
1. Universal DMX controller
2. RDM.
3. Master/Slave.
4. Art-Net.
5. Manual.
8.1 DMX Address Setting
If you use a universal DMX controller to control the units, you have to set DMX address from 1 to 512 so that the units can receive DMX signal.
Press the MENU button to enter menu mode, select
DMX Functions
, press the
ENTER
button to confirm, use the
UP/DOWN
button to select
DMX Ad-
dress
, press the
ENTER
button to confirm, the present address will blink on the display, use the
UP/DOWN
button to adjust the address from 001 to
512, and press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle 7 seconds to exit menu mode.
Please refer to the following diagram to set the DMX address for the first 4 units
8.2 DMX Configuration
1 Channel Mode
Channel Mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
1 Channels
1
2
3
4
2 Channels
1
3
5
7
3 Channels
1
4
7
10
4 Channels
1
5
9
13
5 Channels
1
6
11
16
CHANNEL
VALUE
FUNCTION
1
DIMMER
0 – 255
Close
"
Open
˄
0% ~ 100%
˅
Summary of Contents for ADB Stagelight LEXPERT PROFILE L
Page 10: ...LEXPERT PROFILE L 10...
