Osprey Talon User Guide
23
© 2016 Osprey Video. Osprey®, Ceylon® & SimulStream® are registered trademarks of Osprey Video AG. All other trademarks are the property of their respective owners.
Product specifications and availability may change without notice <20161223
Encoder Setup
By default the encoder setup dialog is presented in its simplified state with the
‘Advanced Settings’ button set to ‘Hide’. The user can take advantage of pre
-set
Encode Profiles that configure the advanced settings for you. To see the full range of
available settings set the ‘Advanced Settings’ to ‘Show’.
Autostart
Autostart is available for each individual encoder. When Autostart is enabled that
encoder will automatically start as soon as Talon boots. This is useful for lights-out
encoding operations that need to come online automatically in the event of power
outage recovery. Other uses include single purpose encoders that will start on power-
up without intervention.
Video Source
The choices in the pull-down menu vary depending upon the Operating Mode you
have selected.
In 1x3 MBR mode you may select from the three available input sources. Once
selected, the same input will be re-used for any additional streams.
In 2x2 LC mode the video source for Stream 1 must always be HD/SDI. The source
for Stream 2 can be either HDMI or Composite.
In 1x1 3G mode any input can be used. The encoded output will always be the
same as the input. This mode is required for 3G output.
NOTE
: Composite is not recommended in 2x2 Mode.
NOTE
: It is recommended in 2x2 Mode that the audio originate either from the SDI
source or the Analog source.
Summary of Contents for Talon G2 model SAH-E23
Page 1: ...Osprey SAH E23 User Guide...