Osprey Talon User Guide
32
© 2016 Osprey Video. Osprey®, Ceylon® & SimulStream® are registered trademarks of Osprey Video AG. All other trademarks are the property of their respective owners.
Product specifications and availability may change without notice <20161223
devices. It is often used for digital signage. It can also be used for limited IP satellite
video.
Destination Address
Enter the Multicast address for your assigned video. It is only necessary to enter the IP
address, as the port number will be specified in the next menu.
Dest Port
This is the assigned port for your broadcast. The default is assigned in the 5000 range,
but any port can be used.
Video Settings
These are the video settings required by the network to deliver a stream to a particular
location. If this is the only stream you may use the defaults. Otherwise insert the values
given by your network administrator. Settings include Video PID, PCR PID and PMT PID.
TS Rate
In order to support the overhead of a Transport Stream the TS rate must be set greater
than the Video Bit Rate. As a rule, 125% of the Video Bit Rate is a good starting point.
Enable Save to File
When streaming with UDP it is possible to simultaneously save a copy to file using the
same encoding settings as your UDP stream. To save a copy of your broadcast as a .TS
file set this menu to “True”. When “True” is
selected, the option appears to choose either
USB Flash Drive or Network Share as a location.
For detailed information see the “Save
to File” instructions below.
(p.34)
Summary of Contents for Talon G2 model SAH-E23
Page 1: ...Osprey SAH E23 User Guide...
